Type C

USB 3.1 Gen1 Hybrid Active Optical Cable

  • USB 3.1 Gen1 Type C to Type C
  • USB 3.1 Gen1 5Gbps, Support USB 2.0/1.1
  • 2Lane DP 1.4 16.2Gbps. 4K @ 60Hz 4K @ 30Hz
  • Up to 15 meters
  • Support PD3.0, 60W (20V/3A)
Product Application
  • Product Introduction
  • Product Details


USB3.1 Gen1 Hybrid Active Optical Cable

Cameras based on the new USB 3.1 Gen1Type C transmission technology are being widely used in industrial production line inspection,3D scanning, video conference and other fields. But due to the transmission limitation of USB 3.1 Type C copper wire, long distance application is limited. In some applications of robot arm, the cable for transmission signals needs not only to be long enough, but also to meet the characteristic of ultra-soft. In order to solve the above two problems, EverPro have launched USB 3.1 Gen1 Type C hybrid active optical cable(EPGUP21-A0A4) with USB 3.1 Type-C interface. Adopting BendRobust® special bending-resistance fiber particularly owned by YOFC with multistrand untra-fine special conductors, bulletproof high-strength nonmetallic strength components and ultra-soft wear-resistant insulating materials make the whole cable reach high flexibility standard, flexible and firm. The transmission length can reach to 15meters which is 2 times that of the traditional copper wire. The product can support full function of USB 2.0, USB 3.1 Gen1 and DP 1.4. Remark: Product application scenario refer to IUH21.

Product Application Scenario
  • Conferencing System

    Long-distance wiring can be realized. Host PC can be hidden in cabinets, wall cabinets or behind displays. Therefore, the centralized management of the host or the security of the system can be met. At the same time, it makes the whole conference room more concise.

  • 3D Scanning

    High-definition USB3 industrial camera suitable for 3D scanning; 5G high bandwidth can transmit high-quality data. Light, soft and slim cables can meet the repeated drag chain requirements of robot arms.

  • Smart Warehousing

    In unmanned warehouse, it can provide high-definition image and control signal transmission for cameras and sensors needed by mechanical picking arm.

  • Somatosensory Application

    It is suitable for AR, VR and other somatosensory devices. By USB3 optical cable, various data can be accurately collected and output, and human-computer interaction experience can be close to “zero” restriction.

  • Cable Length

    Up to 15m


  • Interface

    Source Connector:USB 3.1 Gen1 Type-C Male Connector

    Connector Display Connector:USB 3.1 Gen1 Type-C Male Connector

  • Rate

    USB 3.1 Gen1 5Gbps, Support USB 2.0/1.1

    2Lane DP 1.4 16.2Gbps, 4K@60Hz 4K @ 30Hz

  • Power Supply

    Source Connector Power Supply :USB bus

    Display Connector Supply :PD3.0 , 60W(20V/3A)

  • Power Consumption


  • Mechanical/Condition

    Connector Dimension(Length/Width/Height):Source Connector: 55mm/12.35mm/9mm ;

                                                                                Display Connector: 55mm/12.35mm/9mm

    Cable Diameter:6.5mm

    Minimum Bend Radius of Cable :30mm

    Operating Temperature:-10-60℃

    Storage Temperature:-20-70℃

- +